VANTAGE™
SLIM DIAMETER .204 ID (5.2mm)
HUNTING AND 3D SHAFT
The low GPI spec of the Vantage™ across all spines allows high FOC arrow builds and a flatter shot trajectory, while retaining the renowned Evolusion Arrows® durability.
If you’re a serious bowhunter or shooting tournament foam, the Vantage™ allows you to build the optimum arrow, ensuring success in the field.
The straightness, spine and weight matching of the Vantage™ is unrivalled by other .204″ ID shafts in its class.
An extensive range of precision components is available for the Vantage™ that will satisfy the most technical bowhunter or 3D/field archer.
SPECIFICATIONS
| STRAIGHTNESS | WEIGHT TOLERANCE | AMO LENGTH |
|---|---|---|
| +/- .001 or better |
+/- 1.0 grains | 32.25 |
| SPINE | GPI | OD |
| 300 | 8.8 | 0.2645 |
| 350 | 8.2 | 0.2630 |
| 400 | 7.1 | 0.2545 |
| 500 | 6.2 | 0.2490 |
ID = inner diameter OD = outer diameter GPI = grains per inch
AMO LENGTH = a method of measuring arrow length in inches from the nock throat to the cut
AMO = Archery Manufacturers Organization
INCLUDED COMPONENTS
WEIGHT
SIZE
EV-T NOCK .204
WEIGHT
8.5 grains
SIZE
–
The EV-T nock fits the slim-diameter Vantage™ shaft and is available in white, black and four translucent colours. White is standard issue with all spines in the Vantage™. Material: high-quality polycarbonate
OPTIONAL COMPONENTS
WEIGHT
SIZE
HALF-OUT .204
1 size
WEIGHT
55 grains
SIZE
SIZE 2
Build arrows with optimum FOC and increased durability with the .204 Half-Out. The 55 grain stainless steel half-out will out-perform any aluminium half-out. For Vantage™ shafts, SIZE 2 fits 300-350-400 spines. Material: Stainless Steel
SLIM INSERT .204
WEIGHT
20-15 grains
SIZE
–
Install these break-off inserts in .204-inch / 5.2mm inner diameter shafts as an extension of your removable screw-in field points. The Slim Insert has a 5-grain break-off section. Perfect for 3D or field archery. Will require a 9/32″ diameter point. Material: Aluminium 7075 T6
TARGET POINT .204
2 sizes
WEIGHT
120-100 grains
90-70 grains
SIZE
SIZE 1
SIZE 2
The Evolusion Arrows® .204 Target Point is a glue-in target and field point to suit the Vantage and Tomahawk shafts. Break-off design in 10-grain increments. For the Vantage™, SIZE 1 fits 300-400 spine and SIZE 2 fits 400-500 spine. For the Tomahawk™, SIZE 1 fits 350-400 spine. Material: Stainless Steel.
NOCK BUSHING .204
WEIGHT
9 grains
SIZE
.2560 seat OD
This precision-made aluminium nock bushing offers protection to the rear of the arrow and adapts the .165-inch ID EV-M nock to the Vantage™, Tomahawk™ and other .204-inch ID shafts. Material: Aluminium 7075 T6
NOCK BUSHING HD .204
WEIGHT
22 grains
SIZE
.260 seat OD
This heavy-duty stainless steel nock bushing offers protection to the rear of the arrow and adapts the .165-inch ID EV-M nock to the Vantage™, Tomahawk™ and other .204-inch ID shafts. Material: Stainless Steel
EV-M NOCK .165
2 sizes
WEIGHT
6.5 grains
SIZE
LARGE & SMALL throat
This press-fit nock has two throat sizes, and fits micro-diameter arrows. Also fits standard-diameter and slim-diameter arrows with the use of nock bushings. Available in white or a choice of six translucent colours. Material: high-quality polycarbonate
PIN BUSHING .204
2 sizes
WEIGHT
10.5 grains
SIZE
SIZE 1
SIZE 2
Shooting tight groups? Protect the Vantage™ and Tomahawk™ arrows from impact with these high-strength pin bushings. All sizes each have a .1280-inch post diameter to fit all pin nocks. For Vantage shafts, SIZE 1 fits 300-350 spine, SIZE 2 fits 400-500 spine. For Tomahawk shafts, SIZE 1 fits 250-275-300-350 spine, SIZE 2 fits 400 spine. Material: Aluminium 7075 T6
XPERT FIELD POINT
+/- 0.5 grain tolerance per dozen
WEIGHT
60, 80, 100, 125 or 150 grains
SIZE
.3080 seat OD (5/16)
The convex profile of this screw-in point makes arrow removal easy. No snagging on bag targets! The point seat sits flush with the .204 Stainless Steel half-out and all .2445 Raptor inserts. Material: Stainless Steel
3D FIELD POINT
+/- 0.5 grain tolerance per dozen
WEIGHT
50, 60, 70, 80 or 100 grains
SIZE
.3040 seat OD (19/64 to 5/16)
The concave profile of this point reduces glance-outs when impacting the rear of arrows already in the target. The point seat sits flush with the .204 Stainless Steel half-out and all .2445 Raptor inserts. Material: Steel
