RAPTOR™
STANDARD DIAMETER .2445 ID (6.2mm)
HUNTING AND 3D SHAFT
The Raptor is a stand-out performer amongst other standard diameter 3D and hunting arrows. You can depend on the strength, consistency and superior weight-matching across every 12-pack of these pure carbon shafts. The Raptor leaves the bow fast, with light grain-per-inch specifications across all spines, appreciated by 3D and lower draw weight archers. Bowhunters can utilise optional Australian-designed brass or stainless steel inserts to build a high FOC arrow.
RAPTOR .005 ARROW with VANES
Raptor arrows are quick out of the bow. In addition to the characteristics of Raptor shafts noted above, Raptor arrows are stabilised by sturdy and reliable Q2i Fusion X-II 2.1 inch vanes. Twelve hand-fletched Raptor arrows are packaged in an Evolusion arrow box.
RAPTOR .005 ARROW with FEATHERS
Shoot smoothly off the shelf. Raptor feathered arrows possess all the qualities of the Raptor shaft noted above. They are hand-fletched in a right helical configuration with 4-inch shield-cut feathers, providing the durability that feather shooters and traditional bowhunters want. Twelve arrows are packaged in an Evolusion arrow box.
SPECIFICATIONS
| STRAIGHTNESS | WEIGHT TOLERANCE | AMO LENGTH |
|---|---|---|
| +/- .005 or better |
+/- 1.5 grains | 32.25 |
| SPINE | GPI | OD |
| 250 | 9.9 | 0.3025 |
| 300 | 9.1 | 0.3005 |
| 350 | 7.8 | 0.2940 |
| 400 | 7.4 | 0.2915 |
| 500 | 6.5 | 0.2860 |
| 600 | 5.6 | 0.2790 |
ID = inner diameter OD = outer diameter GPI = grains per inch
AMO LENGTH = a method of measuring arrow length in inches from the nock throat to the cut
AMO = Archery Manufacturers Organization
INCLUDED COMPONENTS
WEIGHT
SIZE
EV-S NOCK .2445
WEIGHT
10 grains
SIZE
–
The Raptor EV-S nock fits the standard-diameter Raptor and Raptor X shafts. 250-350 spine shafts include Green nocks, and 400-600 spine shafts include Yellow nocks. EV-S nocks are available separately in white or a choice of six translucent colours. Material: high-quality polycarbonate
INSERT .2445
20 grains
WEIGHT
20 grains
SIZE
.3050 face OD
The length of this insert offers excellent alignment of broadheads to standard diameter hunting arrows. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: 7075 T6 aluminium
OPTIONAL COMPONENTS
WEIGHT
SIZE
INSERT .2445
15 grains
WEIGHT
15 grains
SIZE
.3050 face OD
3D archers building 5 gpp arrows, or anyone wanting to reduce arrow weight, will appreciate this lightweight insert. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: 7075 T6 aluminium
INSERT .2445
Brass kit
WEIGHT
50+25 grains
SIZE
.3050 face OD
This two-piece insert kit is custom-designed for tuning Raptor arrows – great for adding weight to broadheads. Kit consists of a 50-grain insert and a screw-in 25-grain weight. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: Brass
INSERT SS .2445
WEIGHT
75 to 55 grains
SIZE
.3050 face OD
This break-off insert adds weight for maximum FOC for arrow/bow combinations that handle the extra mass upfront. It has a 20-grain break-off section. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: Stainless Steel
TARGET POINT .2445
2 sizes
WEIGHT
120-100 grains
90-70 grains
SIZE
SIZE 1
SIZE 2
The Australian-designed Raptor point is a glue-in target, 3D and field point to suit Raptor and other standard diameter arrows, in two sizes with break-off of 10-grain increments. For Raptor & Raptor X arrows, SIZE 1 fits 250-350 spine and SIZE 2 fits 400-600 spine. Material: Stainless Steel
PIN BUSHING .2445
WEIGHT
11.5 grains
SIZE
.2980 OD
Are other 3D shooters aiming for your Raptors? Protect them from impact with these high-strength pin bushings. They have a .1280-inch post diameter to fit all pin nocks. Material: 7075 T6 Aluminium
PIN NOCK – Bohning®
2 sizes
WEIGHT
4.5 grains
SIZE
LARGE & SMALL throat
This Pin Nock made by Bohning is the nock we recommend for use with our Pin Bushing .2445 in our Raptor X and Raptor standard diameter arrows. Material: high-quality polycarbonate
NOCK BUSHING .2445
WEIGHT
7.4 grains
SIZE
.2910 OD
This anodised aluminium nock bushing offers increased protection to the rear of the arrow and is designed as a firm fit for .165-inch ID EV-M nocks with .2445-inch ID shafts. Material: 7075 T6 aluminium
EV-M NOCK .165
2 sizes
WEIGHT
6.5 grains
SIZE
LARGE & SMALL throat
This press-fit nock has two throat sizes, and fits micro-diameter arrows. Also fits standard-diameter and slim-diameter arrows with the use of nock bushings. Available in white or a choice of six translucent colours. Material: high-quality polycarbonate
XPERT FIELD POINT
+/-Â 0.5 grain tolerance per dozen
WEIGHT
60, 80, 100, 125 or 150 grains
SIZE
.3080 seat OD (5/16)
The convex profile of this screw-in point makes arrow removal easy. No snagging on bag targets! The point seat sits flush with Tomahawk half-outs, ZT outserts, and all Raptor inserts. Material: Stainless Steel
3D FIELD POINT
+/-Â 0.5 grain tolerance per dozen
WEIGHT
50, 60, 70, 80 or 100 grains
SIZE
.3040 seat OD (19/64 to 5/16)
The concave profile of this point reduces glance-outs when impacting the rear of arrows already in the target. The point seat sits flush with Tomahawk half-outs, ZT outserts, and all Raptor inserts. Material: Steel
FEATHER – Shield cut
25-pack
WEIGHT
3.5 grains
SIZE
4-inch
Hand-fletched on Raptor feathered arrows, these right-wing feathers also suit aluminium or timber shafts. They offer fast arrow stabilisation and maximum forgiveness when shooting off the shelf. Available in six colours: Black, White, Red, Orange, Yellow and Forest Green.
