RAPTOR X™
STANDARD DIAMETER .2445 ID (6.2mm)
HUNTING AND 3D SHAFT
You can’t ignore the accuracy, durability and performance of the Raptor X. The tight straightness tolerances and superior weight-matching across every 12-pack of this flat shooting .003 shaft continue to impress. This pure carbon shaft is quick out of the bow, with light grain-per-inch specifications across all spines. Bowhunters can fine-tune FOC with the optional Australian-designed brass or stainless steel inserts.
SPECIFICATIONS
| STRAIGHTNESS |
WEIGHT TOLERANCE | AMO LENGTH |
|---|---|---|
| +/- .003 or better |
+/- 1.0 grains | 32.25 |
| SPINE | GPI | OD |
| 250 | 9.9 | 0.3025 |
| 300 | 9.1 | 0.3005 |
| 350 | 7.8 | 0.2940 |
| 400 | 7.4 | 0.2915 |
| 500 | 6.5 | 0.2860 |
| 600 | 5.6 | 0.2790 |
ID = inner diameter OD = outer diameter GPI = grains per inch
AMO LENGTH = a method of measuring arrow length in inches from the nock throat to the cut
AMO = Archery Manufacturers Organization
INCLUDED COMPONENTS
WEIGHT
SIZE
EV-S NOCK .2445
WEIGHT
10 grains
SIZE
–
The Raptor EV-S nock fits the standard-diameter Raptor and Raptor X shafts. 250-350 spine shafts include Green nocks, and 400-600 spine shafts include Yellow nocks. EV-S nocks are available separately in white or a choice of six translucent colours. Material: high-quality polycarbonate
INSERT .2445
20 grains
WEIGHT
20 grains
SIZE
.3050 face OD
The length of this insert offers excellent alignment of broadheads to standard diameter hunting arrows. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: 7075 T6 aluminium
OPTIONAL COMPONENTS
WEIGHT
SIZE
INSERT .2445
15 grains
WEIGHT
15 grains
SIZE
.3050 face OD
3D archers building 5 gpp arrows, or anyone wanting to reduce arrow weight, will appreciate this lightweight insert. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: 7075 T6 aluminium
INSERT .2445
Brass kit
WEIGHT
50+25 grains
SIZE
.3050 face OD
This two-piece insert kit is custom-designed for tuning Raptor arrows – great for adding weight to broadheads. Kit consists of a 50-grain insert and a screw-in 25-grain weight. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: Brass
INSERT SS .2445
WEIGHT
75 to 55 grains
SIZE
.3050 face OD
This break-off insert adds weight for maximum FOC for arrow/bow combinations that handle the extra mass upfront. It has a 20-grain break-off section. Suits a screw-in point with an outer diameter of 19/64 to 5/16 inches. Material: Stainless Steel
TARGET POINT .2445
2 sizes
WEIGHT
120-100 grains
90-70 grains
SIZE
SIZE 1
SIZE 2
The Australian-designed Raptor point is a glue-in target, 3D and field point to suit Raptor and other standard diameter arrows, in two sizes with break-off of 10-grain increments. For Raptor & Raptor X arrows, SIZE 1 fits 250-350 spine and SIZE 2 fits 400-600 spine. Material: Stainless Steel
PIN BUSHING .2445
WEIGHT
11.5 grains
SIZE
.2980 OD
Are other 3D shooters aiming for your Raptors? Protect them from impact with these high-strength pin bushings. They have a .1280-inch post diameter to fit all pin nocks. Material: 7075 T6 Aluminium
PIN NOCK – Bohning®
2 sizes
WEIGHT
4.5 grains
SIZE
LARGE & SMALL throat
This Pin Nock made by Bohning is the nock we recommend for use with our Pin Bushing .2445 in our Raptor X and Raptor standard diameter arrows. Material: high-quality polycarbonate
NOCK BUSHING .2445
WEIGHT
7.4 grains
SIZE
.2910 OD
This anodised aluminium nock bushing offers increased protection to the rear of the arrow and is designed as a firm fit for .165-inch ID EV-M nocks with .2445-inch ID shafts. Material: 7075 T6 aluminium
EV-M NOCK .165
2 sizes
WEIGHT
6.5 grains
SIZE
LARGE & SMALL throat
This press-fit nock has two throat sizes, and fits micro-diameter arrows. Also fits standard-diameter and slim-diameter arrows with the use of nock bushings. Available in white or a choice of six translucent colours. Material: high-quality polycarbonate
XPERT FIELD POINT
+/-Â 0.5 grain tolerance per dozen
WEIGHT
60, 80, 100, 125 or 150 grains
SIZE
.3080 seat OD (5/16)
The convex profile of this screw-in point makes arrow removal easy. No snagging on bag targets! The point seat sits flush with Tomahawk half-outs, ZT outserts, and all Raptor inserts. Material: Stainless Steel
3D FIELD POINT
+/-Â 0.5 grain tolerance per dozen
WEIGHT
50, 60, 70, 80 or 100 grains
SIZE
.3040 seat OD (19/64 to 5/16)
The concave profile of this point reduces glance-outs when impacting the rear of arrows already in the target. The point seat sits flush with Tomahawk half-outs, ZT outserts, and all Raptor inserts. Material: Steel
